MIPRO AT-90W
Wideband Transmitting & Receiving Log Antenna
Download
|
| ||
Description
AT-90W is a bi-functional log antenna for professional receiving and transmitting applications. Optimized for 470~1000 MHz, which is compatible with US and EU new telecom regulations. It has a 4~6 dBi gain which is ideal for any installation required specific directions. The wideband ACT-90W can be easily distinguished from its predecessor, AT-90, by its new “W-Shaped” design.
AT-90W has two input connectors, “TX/RX” which can be connected to transmitter or receiver directly. The “RX only” connector has a built-in 12 dB high gain booster provides increased reception range for ACT receiver.
AT-90W offers users the options of transmitting or receiving based on actual application. Built-in booster power can be provided from a MIPRO AD-707a or ACT Series receivers through the coaxial cables. AT-90W is waterproof and ideal for both indoor and outdoor applications.
AT-90W has two input connectors, “TX/RX” which can be connected to transmitter or receiver directly. The “RX only” connector has a built-in 12 dB high gain booster provides increased reception range for ACT receiver.
AT-90W offers users the options of transmitting or receiving based on actual application. Built-in booster power can be provided from a MIPRO AD-707a or ACT Series receivers through the coaxial cables. AT-90W is waterproof and ideal for both indoor and outdoor applications.
Specification
- Frequency Range: UHF 470MHz~1000MHz
- Antenna Gain: 4~6dBi
- Booster Gain: RX Connector: 12±1dB ; TX/RX Connector: 0dB
- VSWR: ≦2:1
- 3-dB Beam-width: 75° Vertical, 130° Horizontal
- Power Consumption: RX Connector - 1120mW（8V DC; New Version: 8~15V DC)
- Impedance: 50Ω
- Connector: TNC Female x2
- Dimensions: 319(W)x270(H)x25(D)mm / 12.6(W)x10.6(H)x1.0(D)"
- Weight: Approx. 430g / 15.2oz
Note:
Refer to actual product in the event of product discrepancy.
Accessories
MS-30
|
MS-90
|
Diagram
|