FBT Vertus MLA 608A
Description
Mixed Control Active Line Array - 8x50W RMS 139dB SPL
- 8 way active HF Line Array Column, in bass reflex with digital/mechanical directivity aiming
- 8x0.75"(20mm) B&C neodymium drivers with 1"(25mm) voice coil on wave guide
- 1.8KHz to 20KHz frequency response
- 8 Class D 50Wrms amplifiers for a total of 400W power
- Completely controllable directional features through control switches on the back panel or through PC software and dedicated network
- Revolutionary combined aiming digital/mechanical full range system from +5˚to-25˚ with included lobe width between 5˚ and 25/40˚
- 8 hybrid stepped motor controlled by a microprocessor for the mechanical aiming of wave guides
- PC/Slave function for aiming control via PC or other MLA module
- Frontal status LED
- DSP processor for the management of digital aiming and signal processing, 4 available presets
- Control panel with XLR input and XLR link, XLR HP-filtered output, volume, presets, 7 step angle aiming, 7 step lobe width, HP filter, ground-lift, RJ45 in/out audio and for installation
- 90˚ Digital-Mechanical controlled dispersion
- Extruded-aluminum powder-coated cabinets
- Superior latching system as well as inferior for the MLA series, allowing for great component modularity
Specification
configuration way: 8
Built-in amplifier cont rms LF/HF W: 8x40
Built-in amplifier max rms LF/HF W: 8x50
Built-in amplifier max peak LF/HF W: 8x100
Frequency response @-6dB: 1.8KHz-20KHz
Low frequency woofer inch: -
High frequency driver inch: 8x0.75 1 coil-neodymium
Maximum SPL cont/peak dB: 135/139
Dispersion HxV: 90∞xDigital-mechanical controlled
Steering angle V: +5/-25
Beamwidth Angle V: 5/40
Input impedance KOhm: 22
Crossover frequency KHz: 1.8
AC Power requirement VA: 300
Input connectors: XLR with loop, SUB out
Power cord m/ft: 5/16.4
Net dimension(WxHxD) mm/inch: 240x625x242/9.5x24.6x9.52
Net weight Kg/Lb: 18/39.7
Transport dimension(WxHxD) mm/inch: 320x725x322/12.6x28.54x12.67
Transport weight Kg/Lb: 20.5/45.2
Built-in amplifier cont rms LF/HF W: 8x40
Built-in amplifier max rms LF/HF W: 8x50
Built-in amplifier max peak LF/HF W: 8x100
Frequency response @-6dB: 1.8KHz-20KHz
Low frequency woofer inch: -
High frequency driver inch: 8x0.75 1 coil-neodymium
Maximum SPL cont/peak dB: 135/139
Dispersion HxV: 90∞xDigital-mechanical controlled
Steering angle V: +5/-25
Beamwidth Angle V: 5/40
Input impedance KOhm: 22
Crossover frequency KHz: 1.8
AC Power requirement VA: 300
Input connectors: XLR with loop, SUB out
Power cord m/ft: 5/16.4
Net dimension(WxHxD) mm/inch: 240x625x242/9.5x24.6x9.52
Net weight Kg/Lb: 18/39.7
Transport dimension(WxHxD) mm/inch: 320x725x322/12.6x28.54x12.67
Transport weight Kg/Lb: 20.5/45.2