FBT Vertus MLA 608A
Description
Mixed Control Active Line Array - 6x250W RMS 137dB SPL
- 6 way active Mid/Low line array column in bass reflex with digital directivity aiming
- 6x8"(200mm) custom neodymium woofers with 2"(50mm) voice coil
- 60Hz to 2KHz frequency response
- 6Class D 250Wrms amplifiers with 3 switch made power supplies for a total of 1500W power
- Completely controllable directional features, though control switches on the back panel or through PC software and dedicated RS-485 network
- Digital full range aiming from +5 to -25˚ with included beamwidth between 5˚ and 25/40˚
- PC/Salve function for aiming control via PC or other MLA module in the network
- Frontal status LED
- Possibility of mounting on subwoofer from the MITUS series through the optional mounting accessory and of wall-mount installation with the supplied bars
- DSP processor for the management of digital aiming and signal processing, 4 available presets
- Control panel with XLR input and XLR link, XLR HP-filtered output, volume, presets, 7 step angle aiming, 8 step lobe width, HP filter, ground-lift, RJ45 in/out audio and for installation
- 90˚ Digital-Mechanical controlled dispersion
- Extruded-aluminum powder-coated cabinets
- Superior latching system as well as inferior for the MLA series, allowing for great component modularity
Specification
configuration way: 6
Built-in amplifier cont rms LF/HF W: 6x230
Built-in amplifier max rms LF/HF W: 6x250
Built-in amplifier max peak LF/HF W: 6x500
Frequency response @-6dB: 60Hz-2KHz
Low frequency woofer inch: 6x8 2 coil-neodymium
High frequency driver inch: -
Maximum SPL cont/peak dB: 133/137
Dispersion HxV: 90∞xDigital controlled
Steering angle V: +5/-25
Beamwidth Angle V: 5/40
Input impedance KOhm: 22
Crossover frequency KHz: 1.8
AC Power requirement VA: 1350
Input connectors: XLR with loop, SUB out
Power cord m/ft: 5/16.4
Net dimension(WxHxD) mm/inch: 240x1285x242/9.5x50.6x9.52
Net weight Kg/Lb: 27/59.5
Transport dimension(WxHxD) mm/inch: 320x1385x322/12.6x54.5x12.67
Transport weight Kg/Lb: 31/68.4
Built-in amplifier cont rms LF/HF W: 6x230
Built-in amplifier max rms LF/HF W: 6x250
Built-in amplifier max peak LF/HF W: 6x500
Frequency response @-6dB: 60Hz-2KHz
Low frequency woofer inch: 6x8 2 coil-neodymium
High frequency driver inch: -
Maximum SPL cont/peak dB: 133/137
Dispersion HxV: 90∞xDigital controlled
Steering angle V: +5/-25
Beamwidth Angle V: 5/40
Input impedance KOhm: 22
Crossover frequency KHz: 1.8
AC Power requirement VA: 1350
Input connectors: XLR with loop, SUB out
Power cord m/ft: 5/16.4
Net dimension(WxHxD) mm/inch: 240x1285x242/9.5x50.6x9.52
Net weight Kg/Lb: 27/59.5
Transport dimension(WxHxD) mm/inch: 320x1385x322/12.6x54.5x12.67
Transport weight Kg/Lb: 31/68.4