FBT Vertus Cla 406A
Description
Active Column Line Array - 600+300W RMS 133dB SPL
- Line Array 2 way speaker system
- 4x165mm custom woofer voice coil 38mm
- Driver B&C neodymium mouth 36mm voice coil 64mm
- Waveguide FBT large format with dispersion 100∞Hx25∞V
- Frequency response from 65Hz to 20KHz
- Amplifiers Class D 600Wrms for LF and HF300Wrms for switching power
- Processor DSP with 8EQ presets
- Control panel with XLR input and link, volume, presets, filter-HP, ground-lift
- Power Connectors Neutrik Powerconn In and Link
- Cabinet 15mm birch plywood with scratch-resistant coating
- 12 attachment points above and below for the optional hardware that allows the installation of hanging or pair 2 CLA406A with angle of 0˚-10˚-20˚ in the vertical plane
- Top side tilted 10∞ for the inclination of 2 columns without damaging gap between the waveguides for a wavefront extremely consistent over the 18KHz
- Support for stand 35mm
- It is ideal for live applications, assisted by sub CLA118SA, which for fixed installations
Specification
configuration way: 2
Built-in amplifier cont rms LF/HF W: -
Built-in amplifier max rms LF/HF W: 600/300
Built-in amplifier max peak LF/HF W: 1200/600
Frequency response @-6dB: 65Hz-20KHz
Low frequency woofer inch: 4x6.5 1.5 coil-neodymium
High frequency driver inch: 1x1.4 2.5 coil-neodymium
Maximum SPL cont/peak dB: 133
Dispersion HxV: 100∞x25∞
Input impedence KOhm: 22
Crossover frequency KHz: 1.2
AC Power requirement VA: 640
Input connectors: XLR with loop
Power cord m/ft: 5/16.4
Net dimension(WxHxD) mm/inch: 190x1135x290/7.48x44.68x11.41
Net weight Kg/Lb: 27/59.52
Transport dimension(WxHxD) mm/inch: 290x1235x390/11.41x48.62x15.35
Transport weight Kg/Lb: 32/70.54
Built-in amplifier cont rms LF/HF W: -
Built-in amplifier max rms LF/HF W: 600/300
Built-in amplifier max peak LF/HF W: 1200/600
Frequency response @-6dB: 65Hz-20KHz
Low frequency woofer inch: 4x6.5 1.5 coil-neodymium
High frequency driver inch: 1x1.4 2.5 coil-neodymium
Maximum SPL cont/peak dB: 133
Dispersion HxV: 100∞x25∞
Input impedence KOhm: 22
Crossover frequency KHz: 1.2
AC Power requirement VA: 640
Input connectors: XLR with loop
Power cord m/ft: 5/16.4
Net dimension(WxHxD) mm/inch: 190x1135x290/7.48x44.68x11.41
Net weight Kg/Lb: 27/59.52
Transport dimension(WxHxD) mm/inch: 290x1235x390/11.41x48.62x15.35
Transport weight Kg/Lb: 32/70.54