FBT MUSE 118FSCA/FSA
Description
PROCESSED CARDIOID-FLYABLE ACTIVE SUBWOOFER - 1200W RMS 140dB SPL
- Compact Hybrid band pass cardioid arrayable subwoofer. Hybrid configuration permit to obtain extension and speed of vented with high SPL and acoustic filtering of band pass
- Suspemsion hardware fully compatible with MITUS 206LA allowing the enclosure to be suspended front or rear-firing for easy cardioid configurations
- Subwoofer can be suspended facing forward or rearward with capability of front or rear mounting the grille and amp module for aesthetic uniformity in cardioid configuaration
- Very large area laminar flow port to ensure no power compression and very low port turbulence
- For cardiod configuarations with once SUB rear-firing and two front-firing, more than 15dB SPL rejection can be obtained behind the array
- 18" (460mm) custom B&C neodymium magnet high excursion woofer with 3" (75mm) voice coil
- Frequency response from 33Hz to 1Hz
- Class D amplifier delivering 1200W RMS
- Switch mode power supply
- DSP with 8 presets, cardiod and with infra configurations, delay
- Control panel with XLR input and link, volume, presets, delay, phase 0∞-180∞, ground-lift
- 5/8" (15mm) birch plywood enclosure, scratch resistant black paint
- Low frequency extension cabinet for the MITUS 206LA line array for flying or ground stacked configurations
- Very low profile for a 18" size woofer
Specification
configuration way: 1 HYBRID BANDPASS
Built-in amplifier cont rms LF/HF W RMS: -
Built-in amplifier max rms LF/HF W RMS: 1200
Built-in amplifier max peak LF/HF W RMS: 2400
Frequency response @-6dB: 33Hz-100Hz
Low frequency woofer inch: 1x18-3.5coil-neodymium
High frequency driver inch: -
Maximum SPL cont/peak dB: 135-139 half-space
Dispersion HxV: omnidirectional
Input impedence kOhm: 22
Crossover frequency kHz: preset dependent
AC Power requirement VA: 640
Input Connectors: XLR with loop
Power cord m/ft: 5/16.4
Net dimension(WxHxD) mm/inch: 576x538x756/22.67x21.18x29.73
Net weight Kg/Lb: 45/99.20
Transport dimension(WxHxD) mm/inch: 700x690x800/27.55x27.16x31.49
Transport weight Kg/Lb: 55/121.25
Built-in amplifier cont rms LF/HF W RMS: -
Built-in amplifier max rms LF/HF W RMS: 1200
Built-in amplifier max peak LF/HF W RMS: 2400
Frequency response @-6dB: 33Hz-100Hz
Low frequency woofer inch: 1x18-3.5coil-neodymium
High frequency driver inch: -
Maximum SPL cont/peak dB: 135-139 half-space
Dispersion HxV: omnidirectional
Input impedence kOhm: 22
Crossover frequency kHz: preset dependent
AC Power requirement VA: 640
Input Connectors: XLR with loop
Power cord m/ft: 5/16.4
Net dimension(WxHxD) mm/inch: 576x538x756/22.67x21.18x29.73
Net weight Kg/Lb: 45/99.20
Transport dimension(WxHxD) mm/inch: 700x690x800/27.55x27.16x31.49
Transport weight Kg/Lb: 55/121.25