FBT HiMaxX 100SA
Download
|
| ||
Description
900W - 133DB SPL PROCESSED ACTIVE SUBWOOFER
- Self-powered bandpass subwoofer
- 18” (460 mm) custom neodymium B&C woofer with a 3” (75 mm) voice coil
- Built-in 900Wrms PWM amplifier
- Switch mode power supply
- Analogue signal processor with limiter
- Control panel with:
- XLR/input and XLR stereo outputs with Hi-Pass, filter for connecting the satellites
- Volume
- Ground-Lift
- 0°-180° phase inverter switch
- Limiter LED
- Box in 18 mm (0.7”) birch plywood
- The special “bandpass” acoustic loading increases efficiency and maximum SPL
- Eight M10 mounting points, stand socket and two integrated wooden handles.
- Optional 4 swivel-mount casters 80 mm ø (3.15”) on request.
Specification
- Configuration way: Band-Pass
- Built-in amplifier cont. rms LF/HF (W): 900
- Built-in amplifier max. rms LF/HF (W): 1200
- Built-in amplifier max. peak LF/HF (W): 2400
- Frequency response (@ -6dB): 38 - 120Hz
- Low frequency woofer (inch): 1x18 - 3 coil
- High frequency driver (inch): /
- Sensitivity (@1W/1m): 102 dB
- Maximum SPL: 135/139 half space dB
- Dispersion (HxV): omnidirectional
- Input impedance (kohm): 22
- Crossover frequency (kHz): active 120
- Input connectors: stereo XLR with loop
- Power cord: 5 m
- Net dimensions (WxHxD): 530x605x655 mm / 21x23,8x25,8 inch
- Net weight (kg / lb): 43/94,8
- Transport dimensions (WxHxD): 660x735x785 mm / 26x29x31 inch
- Transport weight (kg / lb): 47 / 103,6