ASYSTEMS NT 1304
VERSATILE DIGITAL NETWORK AMPLIFIER WITH DSP PROCESSING
1000 Watt 4-Channel Networking Amplifier with DSP Processing

Feature

  • 4-channel amplifier – 130 watts per channel
  • 4 ohm and constant voltage models available (70V or 100V)
  • 4-in x 4-out sophisticated matrix mixing makes routing easy
  • Optional Dante networking (model no. DT-44)
  • Internal sampling rate set at 48kHz
  • 24-bit A/D D/A conversion
  • Extensive internal signal processing
  • Remote user control through Asystems Windows software
  • Real-time error notifications via email reporting function
  • DSP Processing:
    • Automatic Mixing
    • Limiters
    • 10-band EQs
    • 2- and 3-way Crossovers
    • Output Delay
  • Password protected user accounts

Specifications

  • Low Z, Stereo Mode, all channels driven (RMS Power Ouput Per Channel)
  • 8Ω, 20Hz-20kHz 1%THD: 80W
  • 4Ω, 20Hz-20kHz 1%THD: 130W
  • Low Z, Bridge Mode, all channels driven (RMS Power Output)
  • 8Ω, 20Hz-20kHz 1%THD: 260W
  • Distributed Output (RMS Power Output Per Channel)
  • 70V, 100V, 20Hz-20kHz 1%THD: 130W
  • Models Available: 4Ω and 8Ω / 70.7V Constant Voltage / 100V Constant Voltage
      -Please consult your sales assistant for information on ordering the model that is best for you
  • System
  1. Amp Circuitry: D
  2. Input Sensitivity: 1.42 Vrms
  3. Distortion (SMPTE-IM): <0.02%
  4. Noise (Unweighted 20 Hz – 20 kHz below rated power): 107 dB
  5. Damping Factor: >300 @ 8Ω
  6. Frequency Response: 20 Hz-20kHz +-1dB; -3dB: 5Hz-50kHz
  7. Input Impedance: 20 kΩ balanced; 10 kΩ Unbalanced
  8. Cooling: Variable Speed Fans – front to rear flow
  9. Indicators: -40dB,-6dB, -3dB, Clip/Protect, Bridge (one per two-channel group), Power, Disable, Standby/Unlock, Protect
  10. Front Panel: AC power switch & gain control
  • Control
  1. Operation Mode: Stereo / Bridge Mono
  2. Voltage Gain: 40 x (32 dB)
  3. Network Control: Built-in Ethernet, 10/100 Mbit/s
  • Connections
  1. Input (Line-level): 4 x 3-pin Euroblock Connectors
  2. Output (Powered): 4 x 2-pin Euroblock Connectors
  • Protection Circuitry
  1. Amplifier Protection: Totally Short / Open / Overheat / VLF / RF protection / Mismatched loads stabilize the transition
  2. Load Protection: On / Off squelch / AC coupling / Triac crowbar (each channel)
  • Power Supply
  1. Power Consumption: ​180W
  2. Power Requirements (Region Dependent)100 – 120VAC, 220 – 240VAC, 50/60Hz